CLiMET 
MODEL CI-1053

CI-1053 Ethernet Modbus and TCP/IP communication 
combined with the smallest and lightest  100 LPM unit

Particle channel sizes:   Four sizes:  0.3, 0.5, 1.0, 5.0 micron

Concentration limit:  10,000 particles per liter (10 x 10⁶ particles per cubic meter) (10% coincidence)

Sample Flow Rate:  100 liters per minute (0.1 cubic meter or 3.53 cubic feet per minute)

Flow Rate Control:  Electronic automatic closed loop

Sample tube extension:  1/2" (12.7 mm) I.D., up to 6.5 ft. (2.0 meters) max. length

Zero count:   < 1 count per 5 minutes, as per JIS 9921

Battery:  Replaceable 9.6 Volts, 12.6 Amp/hour nickel metal hydride, 3.5 to 4.5 hours of continuous operation (4.0 hours typical), 3.5 - 4.0 hours charge time

Display:  TFT color LCD, 1/4 VGA touch screen

Printer: Thermal Dot Matrix

Memory:  3,000 samples: Date, Time, 4 Particle Channels, Flow, ID, Sample Volume, transferable to PC via RS-232 serial port and Ethernet.

Unit ID:   User selectable

User ID:  Up to 20 users, besides supervisor, with password authentication

Security:  Four security levels with user authentication

Location ID:  Up to 100 per program; 16 characters long

Program:   Up to 30 user-defined and named, containing ID's and settings.

Input/Output:  RS-232; Ethernet 10/100Base-T (auto sensing), half or full duplex (auto sensing), built in http web server, Ethernet Modbus server and TELNET server.

Beep on Count:   0.5 micron and greater

Alarm Output:   Dry contacts, normally open or closed via alarm connector, Connector also has +12 VDC @ 250 mA.

Alarm Limits:   Programmable for all particle channels and flow

Dimensions:  H-W-D: 8.65 x 8.5 x 9.5 inches (21.97 x 21.6 x 24.1 cm)

Weight:     11.0 lb (5.0 Kg) without battery
                 14.25 lb (6.46 Kg) with battery

Power:   Auto Switching:  100-240 VAC, 47/63 Hz, 90 VA max

Operating Range:  32 - 97 deg. F (0 - 36 deg. C), 10-90% RH, non-condensing

Calibration:   Factory prime calibration with monodisperse polystyrene latex spheres, NIST traceable using CalPro 2.00 (or later) calibration software, recommended every 12 months.

Gas Compatibility:  Air, nitrogen, consult factory regarding other gases.

External Exhaust:  Ships with 1/2 inch hose fitting (standard)